DIESEL FUEL FILTRATION UNIT
The filtration unit CP4202 is designed to clean a wide range of fuel tanks and storage units. The unique Chainings 203mm-filter medium is fitted to the unit, which will remove water, acids, sludges, bacterial compounds and all other aqueous contaminants together with solids above 1 micron. Can be custom designed to suit specific requirements.
Benefits
• Prolonged engine injector life
• Extended fuel In-line filter life
• Improved fuel efficiency
MODEL 1
Part No.: CP1202-0000
Flow rate 400 Litres per Hour
Features include " Puncture proof" rubber wheeled tyres
Electrical supply 220V Single Phase (Options available)
Simple On/Off Control with automatic isolation in the event of filter element blockage
Can still operate at height - maximum lift is 4 Metres
Weight: 50Kgs
Dimensions: 110*60*45cm
MODEL 2
Part No.: CP4202-0000
Flow rate 2400 Litres per Hour
Features include " Puncture proof" rubber wheeled tyres
Electrical supply 220V Single Phase (Options available)
Electrical Cabinet with 24V Low voltage controls and Alarms
Automatic isolation in the event of filter element blockage.
Can still operate at height - maximum lift is 5 Metres
Features can be mounted on a mobile trolley with front turntable
All over protective cover manufactured in steel and powder-coat painted.
Weight: 300Kgs
Dimensions: 65*130*90cm
MODEL 3
Part No.: CP4203-0000
Flow rate 3000 Litres per Hour
Maximum operation time for ultimate clealiness 300Hours
(Unless filter blocked beforehand)
Electrical supply 360-415vac 50Hz 3 Phase (Options available)
Electrical Cabinet with 24V Low voltage controls and Alarms
Automatic isolation in the event of filter element blockage.
Fuel Bunk for storing - Can be filtered before refueling a vehicle
All over protective cover manufactured in steel and powder-coat painted.
Weight: 1850Kgs
Dimensions: N/a
The Chainings Fuel recovery system has the capabilities to transfer diesel from individual vehicle fuel tanks to a bulk storage reservoir.
Whilst stored, the unique Chainings product will filter the diesel fuel to remove water, acid, sludges, bacterial compounds and other aqueous contaminates together with solid particles above 1 micron in size.
Once fully filtered, the system can transfer the cleaned diesel fuel back to the vehicle fuel tanks. Also incorporated in the recovery system is the option to purge and filter the diesel fuel systems and tanks of each individual vehicle.